Vediamo 04.02.02 with C3 configure working Shorttest/analysis

It’s kind of ipcircle who share a little installation manual for Xentry users who have problems with Vediamo to work with star C3 Mux.

First you need a Xentry/DAS working with your C3 Mux on Com 2, so you can exclude any problems with Comport configuration, bad .bin files for the mux or blacklistet serials.

If you feel, everything is OK with your C3 Mux on Xentry and DAS, install Vediamo 04.02.02 from here:

After installation and copy the patch, start Vediamo Startcenter to see, Vediamo ist working.

Close Vediamo.

Go to : C:\program files\Vediamo\Caesar\driver

Here you have to edit the slave.ini, look for [PartD] and change the com port to 2 like this:
Com=2 ; COM port

Now go to: C:\Documents and Settings\All Users\Application Data\Vediamo\Config\

Edit here the vediamo.ini
search for:
USE_SISerialDriver=0 under [CAESAR] entry and change it to:

Search for:
ShowDefaultSystems=0 under [ECOUTE] entry and change it to:

Search for:
ComPort=2049 under [PSR] entry and change it to:

search for:
CCFPFAD=C:\Documents and Settings\All Users\Application Data\Vediamo\VediamoData\
under [CAESAR] entry and change it to:

search for:
CFFPFAD=C:\Documents and Settings\All Users\Application Data\Vediamo\VediamoData\
under [CAESAR] entry and change it to:

search for:
CBFPFAD=C:\Documents and Settings\All Users\Application Data\Vediamo\VediamoData\
under [CAESAR] entry and change it to:

search for:
ShortTestDataDir=C:\Documents and Settings\All Users\Application Data\Vediamo\VediamoShortTestData\
under [ECOUTE] entry and change it to:

Create a folder named VediamoData in E:\
In this folder create a folder named cbf and a folder named cff

Now we have to copy the importent cbf files from here:(Database Vediamo.txt)…to-meers

and the cff files from here:…#pid349065

Connect your mux and start Vediamo StartCenter.exe

You will see your mux in Vediamo Server window with serial number.





If not, click Update and look for Part D is selected.



Press Update and wait for your mux is showing in the window.
Now we start Ecoute.
Look for the Server message in the left corner.

If you see your c3 mux with serial number, all is fine.

Go to System->Select

you should see all the ECU cbf files in here.


Close this window.

Go to Extras->Flashdata administration
Click Add
select the E:\VediamoData\cff folder.
If you see all these folders, containing all these cff files, choose down at Files of type->Show folders only
click select. Wait ! It’s depends on your Laptop and could take up to 10 min.

Flashfile administration

close Flashdata administration.

at least, we copy the Shorttest ini’s (Kurztest.ini, KurztestVan.ini, ECUGroup.ini) from here:!y1R2TQTY!tYCPVTRMjZDAc9nlHa547XLeV_OYyKcFLWcujWCl0gs   password: thisisav3rylongPASSw()rd

C:\Documents and Settings\All Users\Application Data\Vediamo\VediamoShortTestData\

That’s it, enjoy Vediamo !

* BIG THANKS to ipcircle in the MH community