SDconnect C4 DTS-monaco user manual

Matched product:

2018.5 MB SD Connect Compact C4 XENTRY Software WIN7 256GB SSD

  • Item No. SS207-AD5
  • Out Of Stock
New 256GB SSD 2018.5 MB SD Connect Compact C4 XENTRY Software
256GB Complete New SSD, High quality!
Latest software version: V2018.5
Support Windows 7 system.
SDconnect C4 DTS-monaco user manual:
What is DTS-monaco?
Which MB sw version comes with DTS-monaco?
Why do you need DTS-monaco?
What’s the difference between DTS-monaco and Vediamo?
Where to get DTS-monaco confirmed to work?
Where to download DTS Monaco for free?
How to install DTS Monaco on Windows 7?
Any good success with DTS Monaco?
How do people think of DTS Monaco?

What is DTS-monaco?

DTS Monaco enables the comprehensive testing of diagnostic communication, diagnostic data and diagnostic sequences in the areas of engineering, testing and preparation of manufacturing tests. It can be adapted flexibly both for a whole range of different test tasks and for different user groups.


Which MB sw version comes with DTS-monaco?


12-2017, 03-2018, 05-2018 (newest)



Why do you need DTS-monaco?


Areas of Application

  • Development of diagnostic and control functions for ECUs
  • Function test and validation
  • Integration and system test
  • Preparation of test sequences for Manufacturing and Service
  • Analysis of returns and Quality Assurance


Flexibly Adaptable to the Relevant Task

DTS Monaco is part of the Diagnostic Tool Set product family and is based on the DTS Base System. Monaco stands for Modular Analyzer for Vehicle Communication. A clearly laid out start page enables simple and fast access to the functions required most frequently. The actual workspace is divided into two: one area with a fixed layout and one with layouts that you can toggle between. A status display below shows communication server messages. The various functions are realized using special, configurable interface elements. These “HMI Controls” can be arranged freely in the layouts in configuration mode and comprehensively configured.


Early Detection of Problems and Errors

In execution mode, a configured workspace can be “started”. In doing so individual functions can be started automatically and communication can be established in advance if so required. Self-generated test sequences enable both simple and very complex function tests. This makes it possible to detect, and remedy, communication problems and function errors at an early stage. Communication data and test results can be documented in entirety in the process.


Fast Results

For typical use scenarios predefined templates including an universal database for the OBD self-diagnosis as well as various protocol templates (WWH-OBD, J1939-73 among others) are supplied. In Demonstration mode, all functions can be tested, even without an interface and a license, using a detailed example including simulation. Furthermore, the tool has a completely integrated OTX runtime for running complex test sequences in accordance with ISO 13209. An authoring tool for creating such OTX sequences can be started directly from DTS Monaco.

Whats the difference between DTS-monaco and Vediamo?


DTS-monaco vs. Vediamo
Functions DTS-monaco Vediamo
All cars have one key code access Yes No

Vehicle control unit software,

One key storage

Yes No
Car fault codes reading Yes No
Data exchange Yes No
Quick test Yes No
Single control unit keys off-set code Yes No
Offline programming Yes Yes
Increase reduced SA codes Yes Yes
Personalize the control unit parameters Yes Yes

DTS-monaco wins, definitely!



Where to download DTS Monaco for free?!p9ZDGKwS!VTn9fB80Z9-YKpV8aj9PkRXR3KinAT6RFiW13GGdOHI It’s free but with unknown security.


Where to get DTS-monaco confirmed to work?


Here you go.


How to install DTS Monaco on Windows 7?


When installing DTS Monaco to communicates and works with SD connect c4 all user installed SDconnect Toolkit version 2.1.3. And no one tried to force the work SDconnect Toolkit version, which is installed together with the installation of Setup_Addon_DAG. And I did it.

Checked only on the system without DAS/Xentry.

DTS Monaco 8.03.12.

Windows 7 x64.

Follow the next steps:

  1. Install Monaco
  2. Install Setup_Addon_DAG
  3. Go to С:\ProgramData\I+ME ACTIA\Toolkit\
  4. Open and edit toolkit.ini




  1. Save file and reboot Windows
  2. Connect SDconnect MUX via cable
  3. Start System Configurator
  4. Go to Licenses and you will see your MUX as DCDIPartW with your serial number. After editing in Interfaces type of MUX will change to MVCI_IME_ACTIA_GmbH_SDconnect
  1. Go toInterfaces



Interface name - > SDconnect_SMR
Bus system interface - > D-PDU API
D-PDU API version - > I+ME ACTIA GmbHXS_D_PDU_API_FOR_DTS_8_03_12
Module type - > MVCI_IME_ACTIA_GmbH_SDconnect
Physical links: CAN1, CAN4, CAN8


  1. Click Save and close System Configurator
  2. Now you can connect to the car or single ECU


Any good success with DTS Monaco?

DTS Monaco works good - Mercedes W205 coding

The video will help you to know how to use DTS.



How do people think of DTS Monaco?


I successfully connected to ZGW221 w/o car
DTS Monaco always sends a notification that it is impossible to contact the EIS221 to read the mileage, voltage, etc. (because w/o car)
(more reviews will be updated here...)