- Original Xhorse NEC Key Adaptor works together with VVDI MB BGA tool key programmer
- (Without soldering/ Without wire jumper/ Not need other adaptor)
Original NEC Key Adaptor support versions:
Can Work Together with VVDI BGA Key Programmer
(Without soldering/ Without wire jumper/ Not need other adaptor)
Updating supports more versions
Support v51 v57 get password directly
Support normal key v28 v35 v40 v51 v57 renew on board
Support keyless go keys v03 v06 v07 v08 v09 v61 renew on board
Support normal key v28 v35 v40 v51 v57 write key file by IR or on board
Support keyless go keys v03 v05 v06 v07 v08 v09 v59 v61 write key file by IR or on board
The above keys all with NEC chip (not BGA type).
You need solder the NEC chip from key and place it to NEC adaptor.
For NEC V51 V57 version, support read password from working key directly, no need read password from EIS.
For all NEC types, you must use “Identification key” to read one time before renew/write key
How to place key NEC chip to adapter via read/write/renew key via NEC adapter?
If you have any questions, please do not hesitate to contact us, below is our contact information:Whatsapp: +86 18750906153
NEC Key Adaptor is optional,renew ESL adaptor under devoleping, will be realeased later.
1pc X VVDI NEC Key Adaptor