Online SCN Coding for STAR SD C3/C4 Wireless Star Diagnosis
- Online SCN Coding for MB STAR MB SD C3/C4 Wireless Star Diagnosis
- It is a one time service, each time cost 89USD for one unit.
Information you need to know before purchasing this service:
1. This is online coding service, no real products, no need shipping.
2. You should have SD C3/C4 and corresponding latest Software.
3. We coding for you online, one time 89usd. Service once done, can not be refund.
.SCN coding only works on a new replacement, the control unit cannot be used, otherwise it cannot be done.
How to proccess this online coding service:
1. Contact our customer service online, to check whether your software and hardware can process this online programming.
2. After we confirm with you that yours can do scn coding, you can place an order on our website and download teamviewer to your computer.
3. Prepare SD C4, car, laptop and teamviewer.
4. Choose the car model and programming system (eg, headlight XALWA-L)
5. Choose CONTROL unit adaptations
6. Choose offline program (CONTROL MODULE PROGRAMMING) then (SCN coding)
7. Give us teamviewer id and password.
8. login server (DALMLER)
9. Login server and finish SCN coding automotively
What should you do after you order the online SCN coding service?
Note: no matter which version of online SCN coding service you pay, you are supposed to do the following procedure.
a. We will contact you to arrange the time for remote control. And send you the remote control software.
b. Please tell us what function you want to do, your VIN number.
c. Prepare the remote control; you need to use the PC with Star diagnostic software run morally.
Give us your ID and password for remote control software; connect the star with your car.
d. Factory engineer open the function for you by remote control. During operation, sometimes you are required to do some settings, such as turn on the ignition or Hanging files. So please wait nearby your PC.
Remote control will not last long time, usually it within 20 minutes. After it is done, please test the car at once. Any other needs, please tell us at once. After it is finished, this online service is over. If you want to do other function later, you need to pay again.
If you have any questions, please do not hesitate to contact us, below is our contact information:Whatsapp: +86 18750906153
Live Support: Chat with us online
What is SCN coding?
Software Calibration number coding, short for SCN coding is intrudes by around 2005. It replaced the previous coding technique with a centralized and almost automated technique to prevent incorrect coding being selected when replacing a module.
When do you need to do SCN coding?
1) Check engine light on
2) Transmission gets stuck in 1 gear. If your have trouble with transmission, there is a good chance that the problem is with you ME control unit and that SCN coding is needed to resolve the issue.
3) Turn the engine and it on again
Why SCN coding is so important?
SCN Codes will now be able to be generated by authorized dealership personnel via any computer with internet access or any NetStar Terminal. This will be possible by the user accessing a secured website utilizing a log-on and password unique to the user. The user then will be able to generate an SCN Code using vehicle data as well as data from the replaced/flashed ECM.
How to do SCN coding?
MBStarTool offers you the perfect solution for ME Control Unit SCN coding: Online SCN Coding Service
for STAR C3/C4/ SD C4
Online SCN Coding Service FAQ
1) If you can not generate a SCN or error message during the process, here is the solution:
Make sure your vehicle is 2003 or newer
Make sure the VIN is correct
Make sure the ECM part number is applicable to vehicle
2) If the STAR diagnostic system not accepting SCN code generated, here is the solution:
Repeat the process and generate the SCN a second time to validate correct number
3) After entering SCN Coding the ECM, the vehicle does not operate properly
Please call the STAR Diagnostic Help Disk
Contact mbstatool technical support