DIY using Star C3 diagnostic multiplexer
STARSHOP offers great tutorial guide with pictures on how to do some special setting with Star C3 Pro
Install Star C3 software follow the step-by-step guide of Star C3 software installation
or check the video on our webpage.
After complete install software, come to Model series selection, select vehicle model, like E 211
Move to the main menu and run a quick self-test.
You will check function list on the menu list, select second option: Functions performed by more than one control unit.
Select corresponding control unit you need to diagnose, here is the Chassis
Select Brake system under Chassis control unit, choose Level adjustment
Here list all control modules that the system able to access. Select Suspension
Check further options, select Initial startup
There are two option under Initial Startup function, pick up the second one
The system screen will display full information of Initial startup with manual settings input for new control unit/Level calibration
The next program show current voltage corresponding to the vehicle's height.
Manually enter the inclination angle value in Entry of value stored in the inclination measuring instrument program
Back to the menu function menu, the following pictures displays how to set unlock or luck beep with Star C3 diagnostic multiplexer. Select Control units
Select Body control unit
These are some options list under Body control module, select REAR SAM
Select Control unit adaptations
Choose National version of ATA function
Come to the National version of ATA function interface, select code options, like USA with buzzer from the drop-down list
Click Yes to save settings.
Here lists just some options of Star diagnostic system, starshop expect you to explore as more functions as you can.