A owner simply made the procedure of transfer data from the old unit to the new unit, using Star diagnosis DAS development diagnostic software.
Device: STAR C3 multiplexer
Software: Xentry/DAS 2013.07
Vediamo with SCN coding database
Model: - 221.156
The extra thing have to do is:
Look at the old control unit version as shown in the picture:
Then after installing new unit and transfer all data to it, next, go to:
Development Data ==> Control unit adaptation ==> Variant coding ==> F3
Then we chose from the list the same number we got in image below
This must work as reported from many of my friends but i always do the online procedure.
Disclaimer:
First, you need to programming new vgs by Vediamo with hardware which you have in your old VGS
Then you will have your variant of coding.
TRY AT YOUR OWN RISK.