Update Error Report in SD Connect C4 Diagnosis (fixed)


SD C4 diagnostic software has been updated to the version 2015.7, which works with SD Connect Compact C4 and supports the latest car and truck models. Do you succeed in update the firmware? Recently, some users has consulted the update error report. Here is the instruction and solution for sharing.
Update Error Report in  SD Connect C4   
Update Error Report in  SD Connect C4
Update Error Report in  SD Connect C4
The error report of STAR Connect Compact4 diagnostic tool is usually because hardware program of the host is deleted that wifi and SDC4 number cannot be setting up.

Solutions:
You can update the hardware program.

Instruction for Update and install V2.30 SD Connect C4 MUX
Update Error Report in  SD Connect C4
 For unpdate, the three files above need to be upgraded.
(01_Boolimage_2_3.zip
 02_CSD_2_10.zip
 PmPic29_Cpld13.zip)

The update order:
02_CSD_2_10.zip> 01_Boolimage_2_3.zip> PmPic29_Cpld13.zip

NOTE: When update, please do use brand new batteries. Also, you need OBD cable to connect to your vehicle for power supply. (If you cannot succeed in connecting to the vehicle, choose OBD 12V power instead; otherwise, 622 error report would appear to tell you that the upgrade is unsuccessful.)
Update Error Report in  SD Connect C4

 
In general, this 00 error means that it is set poorly.

Here is some solution for update error report to help you update V2015.07 smoothly with New SD Connect C4 diagnostic multiplexer.

http://www.MBStarTool.com/wholesale/latest-mb-sd-connect-compact-c4-software-hdd.html